Extech Instruments 42582 Bedienungsanleitung

User's Guide IR Thermometer Printer / Datalogger with External Contact Probe Model 42582 Introduction Congratulations on

Model 42582 Version 6.0 Sept 2007 10 Specifications General Specifications Display Backlit Multi-function LCD Over range indication "-------

Model 42582 Version 6.0 Sept 2007 11 Maintenance Cleaning Wipe instrument with damp cloth as needed. Do not apply solvents or abrasives to the meter

Model 42582 Version 6.0 Sept 2007 12 Emissivity Considerations The amount of IR energy emitted by an object is proportional to an object's temp

Model 42582 Version 6.0 Sept 2007 13 Software System Requirements • Hardware Requirements: 486 PC or better with COM 1 and COM 2 Serial ports • Op

Model 42582 Version 6.0 Sept 2007 14  Support line (781) 890-7440 Technical support: Extension 200; E-mail: [email protected] Repair & Returns

Model 42582 Version 6.0 Sept 2007 2 Description Meter Front Panel 1. Laser pointer beam 2. Non-contact temperature sensor 3. LCD Display 4. Functi

Model 42582 Version 6.0 Sept 2007 3 Operation Press the ON/OFF button to power the meter. The WELCOME screen will appear along with four softkey sel

Model 42582 Version 6.0 Sept 2007 4 IR non-contact Measurements 1. Turn the instrument ON. 2. Press the F1 MEAS softkey from the WELCOME screen to

Model 42582 Version 6.0 Sept 2007 5 Manual Datalogging Mode This instrument has two datalogging modes, MEM Manual Datalogging (99 records maximum) a

Model 42582 Version 6.0 Sept 2007 6 Viewing Stored Readings 1. From the WECLOME screen, press the F2 MEM softkey 2. Use the Arrow keys to scroll th

Model 42582 Version 6.0 Sept 2007 7 Automatic Datalogging Mode In the LOG Automatic Datalogging mode the Model 42580 can automatically measure and s

Model 42582 Version 6.0 Sept 2007 8 To edit the fields in datalogger SETUP Screen1: 1. Use the up and down arrow keys to scroll through the paramet

Model 42582 Version 6.0 Sept 2007 9 Field of View The meter’s field of view is 8:1, meaning that if the meter is 8 inches from the target, the diame